Adjusting the focus and brightness (exposure)

Taking pictures with Manual Focus

MF Assist

Displaying the MF Assist

••Turn the control ring to display MF Assist.

••You can also display MF Assist by pressing to display the setting screen, pressing the cursor button to set the position to be enlarged, and then pressing [MENU/SET].

••When you perform the following operation, the position to be enlarged will be returned to the center.

––When you press the [DISP.] button on the screen used for setting of the position to be enlarged

••If you press the cursor button when [Direct Focus Area] in the [Custom] menu is set to [ON], the setting screen for the enlarged position appears.

Closing the MF Assist

••To exit MF Assist, press the shutter button halfway. ••You can also exit MF Assist by pressing [MENU/SET].

••When you display MF Assist by turning the control ring, MF Assist is automatically ended approximately 10 seconds after you finish the operation.

Not available in the following case:

●●The MF Assist is disabled in the Digital Zoom range or when recording motion pictures.

Setting the display method of MF Assist

[Custom] → [MF Assist]

[  ] Turn the control ring or press the [  ] button (  ) to enlarge the position.

[  ] Turn the control ring to enlarge the position.

[   ]

Press the [   ] button (   ) to enlarge the position.

[OFF]

The control ring or [   ] button (   ) cannot be used to enlarge the position.

 

 

131

SQW0021

Page 131
Image 131
Panasonic DMC-LX100 owner manual 131, Setting the display method of MF Assist