Panasonic DMC-LX100 owner manual 284, Copying still pictures and motion pictures

Connecting with other devices

Storing recorded still pictures and motion pictures on your PC

Copying still pictures and motion pictures

Preparations

••Install “PHOTOfunSTUDIO” on your computer before starting the copying procedure. (→283)

••Turn on the camera and computer.

1 Connect camera to computer

••Check the plug direction and insert it straight in. (If the cable is inserted in the wrong direction, the plug could become deformed and cause faulty operation) Also, do not insert into the wrong socket. Doing so may cause damage to this unit.

••Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional). Using cables other than the above may cause a malfunction.

[AV OUT/DIGITAL] socket

Align the marks, and insert.

		USB	connection cable (supplied)
[Access]	(sending data)

••Do not disconnect the USB connection cable (supplied) while [Access] is displayed.

2Use to select [PC] and press [MENU/SET]

••Setting the [USB Mode] to [PC] removes the need to make the setting each time the camera is connected to the computer.

3Use “PHOTOfunSTUDIO” to copy pictures to your computer

••For details on how to use “PHOTOfunSTUDIO”, see the “PHOTOfunSTUDIO” manual (PDF).

●●Do not delete or move copied files and folders using Windows Explorer or other browsers. Otherwise, you will not be able to play back or edit the files using “PHOTOfunSTUDIO”.

■■For PTP mode

The camera can be connected to your computer even if [USB Mode] (→47) is set to [PictBridge(PTP)].

••Only picture output can be performed.

••If you cannot connect to your PC in PTP mode, set [USB Mode] to [PC] and reconnect.

••It may not be possible to import if there are 1,000 or more pictures on the card. ••Motion pictures or RAW pictures cannot be read.

284

SQW0021