Panasonic DMC-LX100 owner manual 146, → Rec → Auto Bracket

Shutter and Drive Settings

Recording while exposure is changed automatically [Auto Bracket]

■■Changing the Single/Burst setting, compensation range, and recording sequence of Auto Bracket

Set the menu

→ [Rec] → [Auto Bracket]

Press to select [Single/Burst Settings], [Step] or [Sequence] and press [MENU/SET]

Press to select the setting and press [MENU/SET]

[Single/Burst

Settings]

(single)

(burst)

[Step]

3·1/3	(3 pictures)	[Sequence]
3·2/3	(3 pictures)
3·1	(3 pictures)
5·1/3	(5 pictures)
5·2/3	(5 pictures)
5·1	(5 pictures)
7·1/3	(7 pictures)
7·2/3	(7 pictures)
7·1	(7 pictures)

0/–/+

–/0/+

••You can take one picture at a time when [  ] is set.

••A burst of pictures can be recorded up to the number of pictures you have set when [  ] is set.

••Close the menu after changing settings.

●●When you take pictures using Auto Bracket after performing Exposure Compensation, the camera will take pictures using the corrected exposure value as a reference.

Not available in the following cases:

●●The [Auto Bracket] is disabled in the following cases:

••When the picture effect (Filter) is set ([Rough Monochrome], [Silky Monochrome], [Miniature Effect], [Soft Focus], [Star Filter], [Sunshine])

••When White Balance Bracket is set

••During motion picture recording

••When [4K PHOTO] is set to [ON]

••When recording using the flash

••During T (time) recording

••When [HDR] is set to [ON]

••When [Multi Exp.] is set

••When using [Time Lapse Shot]

••When using [Stop Motion Animation] (only available with [Auto Shooting] setting)

••When [Simultaneous record w/o filter] is set to [ON]

146

SQW0021