Panasonic DMC-LX100 241, Send Images Stored in the Camera, Select Single Select or Multi Select

Wi-Fi

Operating the camera by connecting it to a smartphone

[Send Images Stored in the Camera]

1Set the menu

→ [New Connection] → [Send Images Stored in the Camera] → [Smartphone]

2Select [Via Network] or [Direct] and press [MENU/SET] ■■When connecting with [Via Network]

(On the camera)

Connect the camera to a wireless access point (→264)

(On your smartphone)

Set Wi-Fi function to “ON”

Select the wireless access point you connected to the camera, and set

Start “Image App” (→228)

■■When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]

(On the camera)

Connect the camera to a smartphone (→267)

(On your smartphone)

Start “Image App” (→228)

■■When connecting with [Manual Connection] in [Direct]

Perform step 2 (→229).

3Select the device you wish to connect to

••When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. To change the send setting, press the [DISP.] button. (→271)

4Select [Single Select] or [Multi Select]

[Single Select]

Select the picture

Press [MENU/SET]

[Multi Select]

Select the picture (repeat)

••If selected again, the setting will be canceled. Select [OK]

••The number of pictures that can be sent by [Multi Select] is limited.

OK

12

4 5

3

••A confirmation screen is displayed. If you select [Yes], the operation is executed.

••To change the send setting, press [DISP.] button.

••To close the connection, select [Exit].

241

SQW0021