Panasonic DMC-LX100 300, Wi-Fi function, This battery cannot be used, No picture to send

Others

Message displays

■■Battery

[This battery cannot be used]

••Use a genuine Panasonic battery.

••Battery cannot be recognized as terminal is dirty. → Wipe any dirt away from the battery terminal.

■■Wi-Fi function

[Failed to connect wireless access point] / [Connection failed] / [No destination found]

••Check following regarding the wireless access point.

→The wireless access point information set on this unit is wrong. Check the authentication type, encryption type, and encryption key. (→266)

→Power of the wireless access point is not turned on.

→Setting of the wireless access point is not supported by this unit.

••Check the network setting of the destination.

••Radio waves from other devices may block the connection to a wireless access point.

→Check other devices that are connected to the wireless access point and devices that use the 2.4 GHz band.

[No picture to send]

••This is displayed when there is no image to transmit due to the restriction of the destination. Check the file type of the image to transmit. (→239, 243, 244, 247, 251, 255)

[Connection failed. Please retry in a few minutes.] / [Network disconnected. Transfer stopped.]

••Radio waves from the wireless access point are getting weak.

→Perform the connection closer to the wireless access point.

••There is no reply from the server or it has exceeded the communication processing time.

→Try again after a while.

••Depending on the wireless access point, connection may be automatically disconnected after specific time has passed.

→Reconnect the connection again.

[Upload to the Cloud Folder is available after Cloud Sync settings have been set up on downloadable devices such as PCs or smartphones.]

••Devices that download images from a cloud folder are not registered.

••Perform Cloud Sync setting. Configure the settings on a PC with “PHOTOfunSTUDIO” or on a smartphone with “Image App”. For details on [Cloud Sync. Service], refer to (→255).

[Connection failed]

••Check following regarding the smartphones you intend to connect.

→The smartphone does not operate.

→Change the access point to connect to in the smartphone Wi-Fi settings to this camera.

→There is no free storage space on the smartphone.

300

SQW0021