Panasonic DMC-LX100 owner manual 253, Send Images While Recording

Wi-Fi

Using WEB services

[Send Images While Recording]

1Set the menu

→ [New Connection] → [Send Images While Recording] → [Web service]

2Select [Via Network] and connect (→264)

3Select a WEB service you want to connect

••When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. To change the send setting, press [DISP.] button. (→271)

4Take still pictures

••To change the setting or disconnect, press [Wi-Fi] button. (→226)

You cannot change the settings while sending still pictures. Wait until sending is complete.

(You can also close the connection by pressing	→	[Setup] → [Wi-Fi] →
[Wi-Fi Function] → [Yes].)

[Send Images Stored in the Camera]

1Set the menu

→ [New Connection] → [Send Images Stored in the Camera] → [Web service]

2Select [Via Network] and connect (→264)

3Select a WEB service you want to connect

••When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. To change the send setting, press [DISP.] button. (→271)

4Select [Single Select] or [Multi Select]

[Single Select]

Select the picture

Press [MENU/SET]

[Multi Select]

Select the picture (repeat)

••If selected again, the setting will be canceled. Select [OK]

••The number of pictures that can be sent by [Multi Select] is limited.

OK

1 2 3

4 5

253

••A confirmation screen is displayed. If you select [Yes], the operation is executed.

••To change the send setting, press [DISP.] button.

••To close the connection, select [Exit].

SQW0021