Panasonic DMC-LX100 owner manual 229, Connecting to a smartphone, Press and hold the Wi-Fi button

Wi-Fi

Operating the camera by connecting it to a smartphone

Connecting to a smartphone

You can easily establish a Wi-Fi connection on the camera by pressing and holding the [Wi-Fi] button or using the NFC function.

Preparation

Install “Image App” in advance. (→228)

1Press and hold the [Wi-Fi] button

Wi-Fi connection lamp (Lit blue)

[Wi-Fi] button

••The information (QR Code, SSID and Password) required for directly connecting your smartphone to this unit is displayed.

••After the second time, the screen for the previously used connection method will appear.

••The same screen can be displayed by selecting items from the menu as follows.

→ [New Connection] →

[Remote Shooting & View]

••When you press [MENU/SET] on the camera, the QR code is displayed in an enlarged size. If it is difficult to read the code, use the enlarge view. (If your smartphone cannot read the QR code, move the camera away from the smartphone or use a connection method other than the QR code.)

••To change the connection method, press the [DISP.] button and select the connection method. (→232)

SSID and Password

QR Code

2Operate the smartphone

••When the connection is complete, live images being captured by the camera are displayed on the smartphone.

(It may take some time after the operation for the connection to be established.)

••The connection method differs depending on the smartphone used. (→230, 231)

229

SQW0021