Panasonic DMC-LX100 Enabling/disabling the histogram display, → Custom → Histogram → on / OFF

Basics

Switching the display information on the recording screen

Enabling/disabling the histogram display

→ [Custom] → [Histogram] → [ON] / [OFF]

Use to set the position.

Displays distribution of brightness in picture – e.g.		(Example)
if the graph peaks at the right, this means there are
several bright areas in the picture. A peak in the center
represents correct brightness (correct exposure). This
can be used as a reference for exposure correction, etc.
	Dark ← OK → Bright

●●When the histogram is not the same as that of the recorded picture under the following conditions, histogram will be displayed in orange:

••When manual exposure assist indicates settings other than 0 EV in [Manual Exposure] Mode or during Exposure Compensation.

••When the flash fires.

••When the correct exposure is not achieved or when the brightness of the screen cannot be

displayed accurately in a dark location.

●●The histogram displayed during recording is only a reference.

●●The histogram is different from those displayed using the image editing software of a computer.

64

SQW0021