Panasonic DMC-LX100 owner manual Displaying still pictures on a TV, 242

Wi-Fi

Displaying still pictures on a TV

You can display still pictures on a TV that is compatible with a DLNA certified digital media renderer (DMR) function.

Preparation

Set the TV to DLNA waiting Mode.

••Read the operating instructions for your TV.

1 Set the menu

→ [New Connection] → [Playback on TV]

2Select [Via Network] or [Direct] to connect (→263)

3Select the device you wish to connect to

••When the connection is established, the screen is displayed.

4Take or play back still pictures on this unit

••To change the setting or disconnect, press [Wi-Fi] button. (→226)

(You can also close the connection by pressing	→	[Setup] → [Wi-Fi] →
[Wi-Fi Function] → [Yes].)

●●When you display the pictures on a TV using the Wi-Fi function, they are not output using 4K resolution. To output pictures using 4K resolution, connect this unit to the TV using an HDMI micro cable. (→276)

●●When a TV is connected to this unit, the TV screen may temporarily return to the status before the connection. Pictures are displayed again when you take or play back pictures.

●●Even if [Effect] and [Sound] are set on this unit, these settings are disabled when the pictures are played back on a TV during Slide Show playback.

●●It may take some time to establish the Wi-Fi connection or it may not be connected at all depending on the distance from this unit to the TV.

Not available in the following cases:

●●Playback of motion pictures or panorama pictures, and continuous playback of group pictures are not displayed on a TV.

●●During the multi/calendar playback, pictures displayed on the screen of this unit are not displayed on TV.

242

SQW0021