Panasonic DMC-LX100 owner manual 250, Send Images Stored in the Camera

Wi-Fi

Sending pictures to a PC

[Send Images Stored in the Camera]

1Set the menu

→ [New Connection] → [Send Images Stored in the Camera] → [PC]

2Select [Via Network] or [Direct] to connect (→263)

3Select the PC you want to connect to

••If the PC you want to connect to is not displayed, select [Manual Input], then enter the computer name (for Mac, enter the NetBIOS name).

4Select the folder you want to send to

••When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. To change the send setting, press [DISP.] button. (→271)

5Select [Single Select] or [Multi Select]

[Single Select]

Select the picture

Press [MENU/SET]

[Multi Select]

Select the picture (repeat)

••If selected again, the setting will be canceled. Select [OK]

••The number of pictures that can be sent by [Multi Select] is limited.

OK

1 2 3

4 5

••A confirmation screen is displayed. If you select [Yes], the operation is executed.

••To change the send setting, press [DISP.] button.

••To close the connection, select [Exit].

●●Folders sorted by the sent date are created in the specified folder, and pictures are saved in those folders.

●●If the screen for a user account and password entry appears, enter the one you set on your PC. ●●If the computer name (for Mac, the NetBIOS name) contains spaces, etc., the name may not be properly recognized. If you cannot connect, we recommend changing the computer name (for

Mac, the NetBIOS name) to a combination of 15 or less alphanumeric characters only.

250

SQW0021