Panasonic DMC-LX100 owner manual 319, It takes long time every time to connect to a smartphone

Others

Q&A Troubleshooting

Wireless access point is not displayed. Or it cannot be connected.

••Check if the wireless access point to connect is in operating state.

••The camera may not display or connect to a wireless access point depending on the radio wave condition.

→Perform the connection closer to the wireless access point.

→Remove the obstacles between this unit and the wireless access point.

→Change the direction of this unit.

••It may not display even if the radio waves exist depending on the setting of the wireless access point.

→Check the settings of the wireless access point.

••The wireless access point may not be found depending on the radio wave condition.

→Perform the [Manual Input]. (→266)

••Is the network SSID of the wireless access point set not to broadcast?

→It may not be detected when it is set not to broadcast. Enter and set the network SSID. (→265)

••Connection methods differ depending on the wireless access point.

→Refer to the operating instructions of the wireless access point.

It takes long time every time to connect to a smartphone.

••It may take longer time to connect depending on the Wi-Fi connection setting of the smartphone, but it is not a malfunction.

This unit is not displayed in the Wi-Fi setting screen of the smartphone.

→ Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi settings of the smartphone.

I have forgotten the login ID or password for the “LUMIX CLUB”.

••Check the information in the login screen of “LUMIX CLUB”. http://lumixclub.panasonic.net/eng/c/

319

SQW0021