Stabilizer, Zoom and Flash

Taking pictures using the flash (supplied)

How to use the flash effectively

Taking a picture using the flash with the subject too close may cause overexposure. When you set [Highlight] in the [Custom] menu to [ON], the overexposed areas will flash black and white during [Auto Review] or playback. If that happens, we recommend taking the picture again, for example, after setting a lower flash output using [Flash Adjust.] (→183).

●●Do not put your hands over the light-emitting area of the flash or look at it from close range. Do not use the flash at close distances to other subjects (heat/light may damage subject).

●●Flash charging may take time if battery is low or if using flash repeatedly. When the flash is being charged, the flash icon flashes red, and you cannot take a picture even when you fully press the shutter button.

●●The flash is fixed to [   ] (Forced Flash Off) in following cases:

••During motion picture recording

••When the picture effect (Filter) is set

••During panorama picture recording

••When using the electronic shutter

••When [HDR] is set to [ON]

••When [Silent Mode] is set to [ON]

178

SQW0021

Page 178
Image 178
Panasonic DMC-LX100 owner manual 178, How to use the flash effectively