Panasonic DMC-LX100 240, Send Images While Recording, Select the device you wish to connect to

Wi-Fi

Operating the camera by connecting it to a smartphone

[Send Images While Recording]

1Set the menu

→ [New Connection] → [Send Images While Recording] → [Smartphone]

2Select [Via Network] or [Direct] and press [MENU/SET] ■■When connecting with [Via Network]

(On the camera)

Connect the camera to a wireless access point (→264)

(On your smartphone)

Set Wi-Fi function to “ON”

Select the wireless access point you connected to the camera, and set

Start “Image App” (→228)

■■When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]

(On the camera)

Connect the camera to a smartphone (→267)

(On your smartphone)

Start “Image App” (→228)

■■When connecting with [Manual Connection] in [Direct]

Perform step 2 (→229).

3Select the device you wish to connect to

••When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. To change the send setting, press the [DISP.] button. (→271)

4Take still pictures

••The still pictures are sent automatically after taking them.

••To change the setting or disconnect, press [Wi-Fi] button.

You cannot change the settings while sending still pictures. Wait until sending is complete.

(You can also close the connection by pressing	→	[Setup] → [Wi-Fi] →
[Wi-Fi Function] → [Yes].)

240

SQW0021