Others

Q&A Troubleshooting

Flash

Unable to perform [Flash].

••Flash (supplied/optional) is not attached properly.

→ Properly attach a flash (supplied/optional) to the camera. (→176, 291)

••For details about flash settings, refer to (→176 - 186, 291).

No flash emitted.

The flash becomes unavailable in the following cases.

••When the picture effect (Filter) is set

••When camera is set to use [Auto Bracket], White Balance Bracket, or [Aspect Bracket]

••When using [Burst]

••During panorama picture recording

••When [HDR] is set to [ON]

••When the electronic shutter is used (→140)

Set [Shutter Type] to [AUTO] or [MSHTR].

••When [Silent Mode] is set to [ON] (→161)

Set [Silent Mode] to [OFF].

The flash fires twice.

••The flash (supplied) fires twice. (Except when [Firing Mode] of [Flash] is set to [MANUAL]) When red-eye reduction (→180) is set, the firing interval will be longer. Make sure that the subject does not move until the second firing is completed.

315

SQW0021

Page 315
Image 315
Panasonic DMC-LX100 owner manual 315, Unable to perform Flash, No flash emitted, Flash fires twice