Panasonic DMC-LX100 owner manual 190, Recording motion pictures

Recording motion pictures

Recording motion pictures

Recording motion pictures

Recording mode:

You can record motion pictures by manually setting the aperture value and shutter speed. (→80)

The camera automatically sets the aperture value and shutter speed and identifies the optimal scene to record motion pictures in [Intelligent Auto] Mode. (→76)

1Press the motion picture button to start recording

••Immediately release the motion picture button after pressing it.

••While you are recording motion pictures, the recording status indicator (red) will flash.

••If you do not perform any operation for approximately 1 minute or longer, some of the information on the screen is turned off. To display the information again, press the [DISP.] button. This operation takes place to prevent screen burn-in. This is not a malfunction.

••Do not block the microphones when recording motion pictures.

••You can also use zoom while recording motion pictures.

––The operating sounds of the zoom lever or control ring may be recorded in some cases.

••Still pictures can be taken during motion picture recording. (→198)

2Press the motion picture button again to end recording

Recording state indicator

Elapsed recording time

Remaining recording time (approx.)

190

SQW0021