Panasonic DMC-LX100 owner manual 158, Press to select OK and press MENU/SET

Functions for specific subjects and purposes

Creating stop motion animation [Stop Motion Animation]

9Press to select [OK] and press [MENU/SET]

••A confirmation screen is displayed. If you select [Yes], the operation is executed.

••You can also create a stop motion animation using [Stop Motion Video] in the [Playback] menu. (→215)

■■Adding pictures to an already recorded stop motion animation group

When you select [Additional] in step 4, group pictures recorded using [Stop Motion Animation] are displayed. Select a group picture and press [MENU/SET]. Then, select [Yes] on the confirmation screen.

●●[Auto Shooting] may not be performed according to the preset interval because recording could take time under some recording conditions, such as when pictures are taken using a flash.

●●When you select the picture quality for an aspect ratio that is different from the original picture, the picture will be displayed with a black band on the upper/lower side or the left/right side of a stop motion animation.

●●When you select the picture quality for an aspect ratio that is different from the original picture, this will produce grainy pictures in a stop motion animation.

●●Use a sufficiently charged battery or an AC adaptor (optional) and DC coupler (optional).

●●If the power supply is cut off due to a power outage or AC adaptor disconnection while a motion picture is being recorded using the AC adaptor (optional), that motion picture will not be recorded.

●●You cannot create a motion picture that is longer than 29 minutes 59 seconds, or whose file exceeds 4 GB.

●●When a stop motion animation is shorter than 2 seconds, “2s” will be displayed for the motion picture recording time (→70).

●●If only one still picture is recorded, it will not be recorded as a group picture. You cannot select only one recorded still picture using [Additional].

Not available in the following cases:

●●[Stop Motion Animation] cannot be used in the following cases:

••During panorama picture recording

••When [Multi Exp.] is set

••When using [Time Lapse Shot]

••When the [Simultaneous record w/o filter] is set to [ON]

158

SQW0021