Panasonic DMC-LX100 owner manual 226, →273

Wi-Fi

Wi-Fi®Function and NFC Function

••Pressing the [Wi-Fi] button during a Wi-Fi connection enables the following operation.

[Terminate the Connection]	Terminates the Wi-Fi connection.
[Change the Destination]∗1	Terminates the Wi-Fi connection, and allows you to
	select a different Wi-Fi connection.
[Change Settings for Sending	For details (→271).
Images]∗2
[Register the Current Destination to	Registering the current connection destination or the
	connection method, you can easily connect with the
Favorite]∗1
	same connection method next time.
[Network Address]	Displays the MAC address and IP address of this unit
	(→273).

∗1 ∗2

This item will not be displayed if you press to send pictures to WEB services while the pictures are displayed (→254).

This item will not be displayed if the destination for [Remote Shooting & View], [Playback on TV] or [Send Images Stored in the Camera] is set to [Printer].

●●Do not remove the memory card or battery or move to an area without any reception while sending images.

●●The camera cannot be used to connect to a public wireless LAN connection.

●●Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless access point.

●●We recommend that you use a fully charged battery when you send pictures.

●●When the battery indicator is flashing red, the connection with other equipment may not start or the connection may be disrupted. (A message such as [Communication error] is displayed.)

●●When sending images on a mobile network, high packet communication fees may be incurred depending on the details of your contract.

●●Pictures may not be completely sent depending on radio wave conditions. If the connection is terminated while sending pictures, pictures with missing sections may be sent.

●●The monitor display may become distorted for an instant while connected to the service, however this will not affect the image being sent.

226

SQW0021