Starting a Video Conference
[G]: The screen will be switched to Input screen 3.
•IP addresses will be cleared if you move to another input screen without pressing [Start].
3Enter the IP address.
•If the IP address contains 1 or 2 digit numbers, enter these numbers as they are. Do not enter like [.001]. Example: The IP address is [192.168.0.1].
–Correct entry: [192.168.0.1]
–Wrong entry: [192.168.000.001]
Note
•You can refer to the contact list when entering the IP address, by following the procedure below:
1.Press [B].
•The contact list screen is displayed.
2.Use [][] to select the contact you want to refer to.
•You can use [ ][ ] to select the displayed tab. (Page 31)
•You can use the numeric buttons of the remote control to select the displayed tab. (Page 31)
3.Press [Enter].
•The display returns to the input screen.
•You cannot enter the IP address using the call history.
4Press [Start] to start the call.
• You can also start the call by pressing [Enter].
5When you want to end the call, press [End].
• The Home screen is displayed.
34
Operating Manual | Document Version |