Contacts and Settings
3.Press [ ].
•The next page is displayed.
4.Use [][] to select "Self Diag." and press [Enter].
•The self diagnosis screen is displayed with the dialog box.
Note
•You can hide or display the dialog box by pressing [B].
•Set the microphone at least 1 m (3.3 ft) away from the speakers.
5.Press [R].
•The self diagnosis starts.
Note
•Check the image that is displayed from the main video camera.
•To avoid feedback, slowly raise the volume using the remote control’s [+] button.
•When someone speaks into the microphone, confirm whether the sound plays back through the speakers.
•During self diagnosis, all Boundary Microphones will be set to "Center stereo".
•During self diagnosis, the tone will be set to "Standard".
6.Press [R].
•The self diagnosis ends.
Note
•If you do not press [R], the self diagnosis will automatically end after about 10 minutes.
7.Press [Home].
•The Home screen is displayed.
Performing Remote
Maintenance
The following operation is for performing remote maintenance by your dealer. After performing the operation, you cannot use the
1.Press [Menu].
•The Menu screen is displayed.
2.Use [][] to select "Settings" and press [Enter].
•The system settings screen is displayed.
3.Press [ ] twice.
•The third page is displayed.
4.Use [][] to select "Remote access" and press [Enter].
•The dialog box to confirm the start of remote maintenance is displayed.
5.Use [ ][ ] to select "Yes" and press [Enter].
•The remote maintenance screen is displayed.
70
Operating Manual | Document Version |