Contacts and Settings
6.Use [ ][ ] to select "Yes" and press [Enter].
•The admin menu screen is displayed in the selected language.
7.Press [Home].
•The Home screen is displayed.
Making Encryption Settings
Note
•Take care when changing encryption settings because doing so may cause you to become unable to communicate with other parties.
•There is a danger that encryption settings will be changed by a third party. Therefore, be careful when managing the administrator password and giving users the authority to change encryption settings.
•If an encryption password is not set, you cannot make encryption settings. For details, contact your dealer.
•Be aware that if encryption is disabled, eavesdropping might be possible on networks that are not secured against such actions.
1.Login to the administrator menu. (Page 71)
•The admin menu screen is displayed.
2.Use [][] to select "Encryption" and press [Enter].
•The encryption settings screen is displayed.
3.Use [][] to select the following items for input:
"Access mode": Use [ ][ ] to select "Admin" (default) or "User".
•When "Admin" is selected, only the network administrator can change the encryption setting.
•When "User" is selected, any users can change the encryption setting. (Page 64)
"Encryption": Use [ ][ ] to select whether to enable encryption.
–"ON": Encryption is enabled.
–"OFF" (default): Encryption is disabled.
Note
•If the "Encryption" setting does not match that of the other party in a video conference call, the video conference call will not start.
•This setting is available only when "Admin" is selected for "Access mode".
4.Press [G].
•A dialog box to confirm the saving of settings is displayed.
5.Use [ ][ ] to select "Yes" and press [Enter].
•The admin menu screen is displayed.
6.Press [Home].
•The Home screen is displayed.
Making Software Update Settings
1.Login to the administrator menu. (Page 71)
• The admin menu screen is displayed.
72
Operating Manual | Document Version |