Displaying Other Video Sources
Displaying a Still Image from the Sub Video Camera
You can display a still image from the sub video camera during a video conference call.
Note
•Fix your sub video camera and the object so that the image is not blurred.
1Press [Camera Sub].
• The sub video camera’s image is displayed.
2Press [R].
•The still image from your sub video camera is displayed on your display and the other party’s display.
Note
•The image becomes gradually clear after a black screen is displayed for about 1 second.
•If you press [R] while the still image is being sent, the image taken when you pressed [R] the second time is sent to other party’s display again.
•If the network has low bandwidth and a high rate of packet loss, either it will take a long time to display a clear image, or a blurred image will be displayed.
1 4
23
3Press [G].
•The display switches from the still image back to the normal sub video camera image.
Note
•A black screen is displayed for about 1 second after you press [G].
4Press [Camera Main].
•The screen returns to the main video camera’s image.
Document Version | Operating Manual |
55