Contacts and Settings
Note
•If the manual settings screen is displayed, press [B] to return to the auto settings screen.
5.Press [G].
•A dialog box to confirm the saving of settings is displayed.
6.Use [ ][ ] to select "Yes" and press [Enter].
•The system settings screen is displayed.
Note
•Depending on how many Boundary Microphones are connected, the output settings differ as follows:
–2 or more Boundary Microphones: Monaural output
–1 Boundary Microphone: Stereo output
7.Press [Home].
•The Home screen is displayed.
Setting the Mic Position manually
1.Press [Menu].
•The Menu screen is displayed.
2.Use [][] to select "Settings" and press [Enter].
•The system settings screen is displayed.
3.Press [ ].
•The next page is displayed.
4.Use [][] to select "MIC Setting" and press [Enter].
• The auto settings screen is displayed.
Note
•If the manual settings screen is displayed, proceed to step 6.
5.Press [B].
•The manual settings screen is displayed.
6.Use [][] to select the Boundary Microphone you want to configure and press [Enter].
7.Use [][] to select the Boundary Microphone’s relative position.
"Left side": Sounds on left side are played.
"Right side": Sounds on right side are played.
"Center Mono": All sounds are played through both the left and right speakers at the same volume. "Center stereo": Sounds centered on the microphone are played through both the left and right speakers at the same volume.
Note
•When a Boundary Microphone is set to "Center stereo", make sure that it is placed with its connector facing the display.
•For the settings shown in the following diagrams, the left/right channels are displayed as viewed from the side of the main video camera.
Here are examples of the relative position of Boundary Microphones.
66
Operating Manual | Document Version |