Panasonic manual 101

Technical Information

Control commands via LAN

JJWhen WEB Control administrator rights password is set (Protect mode) zzConnection method

1111Obtain the IP address and port number (Initial set value = 1 024) of the projector and make a request for connection to the projector.

Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page.

IP address : Obtain from MAIN MENU → [Network] → [Network status]

Port No. : Acquire from the WEB control “Detailed set up ” → “Command port set up” page

2222There is a response from the projector.

Response data

Data section	Blank	Mode	Blank	Random number	Termination
				section	symbol
“NTCONTROL”	‘  ’	‘1’	‘  ’	“zzzzzzzz”	(CR)
				(ASCII code hexadecimal
(ASCII string)	0x20	0x31	0x20		0x0d
				number)
9 bytes	1 byte	1 byte	1 byte	8 bytes	1 byte

Mode : 1 = Protect mode

3333Generate a 32-byte hash value from the following data using MD5 algorithm.

“xxxxxx:yyyyy:zzzzzzzz”

xxxxxx: Administrator rights user name for WEB CONTROL (Default user name is “admin1”)

yyyyy : Password of above administrator rights user (Default password is “panasonic”)

zzzzzzzz : 8-byte random number obtained in Step 2

zzCommand transmission method

Transmit using the following command format.

Transmitted data

Header			Data section	Termination symbol
Hash value	‘0’	‘0’	Control command	(CR)
(See above
	0x30	0x30	(ASCII string)	0x0d
<Connection method>)
32 bytes	1 byte	1 byte	Undefined length	1 byte
Receive data
Header			Data section	Termination symbol
‘0’	‘0’		Control command	(CR)
0x30	0x30		(ASCII string)	0x0d
1 byte	1 byte		Undefined length	1 byte
Error response
	Error message			Termination symbol
“ERR1”	Undefined control command
“ERR2”	Out of parameter range
“ERR3”	Busy state or no-acceptable period			(CR)
“ERR4”	Timeout or no-acceptable period			0x0d
“ERR5”	Wrong data length
“ERRA”	Password mismatch
	4 bytes			1 byte

Appendix

ENGLISH - 101