Panasonic Basic operations by using the remote control

Basic operations by using the remote control

Using the SHUTTER/ AV MUTE button

* <SHUTTER> button

Only for EZ570 series, EW630 series and EX600 series

This function allows you allows you to completely block out light to the screen.

button

Press the <SHUTTER*> button on the remote control.

Note

zzFor details, see “Setting” of Main menu. (Æpage 68)

* <AV MUTE> button

Only for EW530 series and EX500 series

モヷチヮヶヵユ button

Press the <AV MUTE*> button on the remote control.

Press the < AV MUTE> button on the remote control to black out the image. To restore to normal, press the < AV MUTE> button again or press any button.

black out projected image

Note

zzWhen use the <MUTE> button to release the [AV mute] function, the mute function cannot be operated at the same time.

Switching the input signal

You can switch the input signals to project.

buttons

Press the <INPUT> button or the <INPUT 1>/<INPUT 2>/<INPUT 3> button on the remote control.

The input source changes each time you press the <INPUT> button as follows:

Input 1 --> Input 2 --> Input 3 --> ...

The input source changes each time you press the <INPUT 1>/<INPUT 2>/<INPUT 3> button as follows:

INPUT 1 button		INPUT 2 button
	Input 1		Input 2
RGB(PC analog)			Video
	RGB (Scart)		Y,Pb/Cb,Pr/Cr
	DVI-D		RGB
	DVI-D(HDCP)	INPUT 3 button
			Input 3
	HDMI
			Video
			Y,Pb/Cb,Pr/Cr
			S-video

Note

zzWhether the input search function is available or not after you pressed the <INPUT> button, it depends on the setting of the [Input button] in the Setting menu. (Æpage 62)

Basic Operation

ENGLISH - 41