Settings

Manual PC adjust

Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu.

Remote Control

Side Control

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

Fine sync

1111Press ▲▼ to select [Fine sync].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to adjust the value.

zzThe value can be adjusted from 0 to 31.

Total dots

1111Press ▲▼ to select [Total dots].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to adjust the value.

Position H

1111Press ▲▼ to select [Position H].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to adjust the horizontal picture position.

JJFor horizontal (right and left) adjustment

OperationAdjustment

The picture

Press ◄. position moves to the

right.

The picture

Press ►. position moves to the

left.

Position V

1111Press ▲▼ to select [Position V].

2222Press the <ENTER> button to display the adjustment dialog box.

3333Press ◄► to adjust the vertical picture position.

JJFor vertical (up and down) adjustment

OperationAdjustment

The picture

Press ►. position moves up.

The picture

Press ◄. position moves down.

52 - ENGLISH