Powering ON/OFF

Turning Off the Projector

1111 Press the <

 

> button on the side control or

the <STANDBY>

button on the remote control,

and Power off? appears on the screen.

2222 Press the <

 

> button on the side control or

the <STANDBY>

button on the remote control

again to turn off the projector. The <ON(G)/ STANDBY(R)> indicator starts to blink orange,

and the cooling fans keep running. At this time, you can unplug the AC power cord even if the fans are still running.

3333 When the projector has cooled down enough, the

<ON(G)/STANDBY(R)> indicator stops blinking

and you can turn on the projector.

Note

Power off? disappears after 4 seconds.

Note

zzIf the <STANDBY> button on the remote control is pressed, the time countdown will be brought to an end without appearing Power off? afterwards on the screen.

zzDo not put the projector in a case before the projector is cooled enough.

zzWhile the <ON(G)/STANDBY(R)> indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the <ON(G)/STANDBY(R)> indicator stops blinking to turn on the projector again.

zzThe projector can be turned on after the <ON(G)/ STANDBY(R)> indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power-off.

JJDirect Power Off function

You can disconnect the power cord from the wall outlet or turn off the breaker even during projection

without pressing the < > button.

Note

zzWhen using the Direct Power Off function, you cannot restart the projector immediately after the power is disconnected. The lamp remains high temperature and needs to be cooled, so it sometimes takes longer time than usual for the lamp to light up again.

Basic Operation

ENGLISH - 39