Sharpness
1111Press ▲▼ to select [Sharpness].
2222Press the <ENTER> button to display the adjustment dialog box.
3333Press ◄► to adjust the setting value.
Operation | Adjustment | Adjustment | |
range | |||
|
| ||
| increase the | Maximum | |
Press ►. | sharpness of the | ||
value 31 | |||
| image |
| |
| decrease the | Minimum | |
Press ◄. | sharpness of the | ||
value 0 | |||
| image |
|
Note
zzWhen [Daylight View] is set to [On] or [Auto], the function is disabled.
Gamma
1111Press ▲▼ to select [Gamma].
2222Press the <ENTER> button to display the adjustment dialog box.
3333Press ◄► to adjust the gamma value to obtain a better balance of contrast.
zzAdjustments can be made between 0 and 15.
Noise reduction
1111Press ▲▼ to select [Noise reduction].
2222Press the <ENTER> button to display the adjustment dialog box.
3333Press ◄► to select the desired item.
Off Disabled
On The function works
zzNoise interference on the screen can be reduced. Select one of the above options to get smoother images.
zz[Noise reduction] cannot be selected when [1 080p] is selected.
Note
zzWhen input video signal to the projector, [Noise reduction] will become available.
Image adjust
Progressive
1111Press ▲▼ to select [Progressive].
2222Press the <ENTER> button to display the dialog box.
3333Press ◄► to select the desired item.
zzAn interlaced video signal can be displayed in progressive mode. Select one of the following options.
zz[Progressive] cannot be selected when [480p], [576p], [720p] or [1 080p] is selected.
Off Disabled
On The function works
Film For watching a film
Note
zzWhen input video signal to the projector, [Progressive] will become available.
Reset
To reset the adjusted data, all adjustments will return to their previous figures.
1111Press ▲▼ to select [Reset].
2222Press the <ENTER> button.
zzA confirmation box appears and then select [Yes].
Note
zzTo reset the adjusted data except [Daylight View].
Store
1111Press ▲▼ to select [Store].
2222Press ► or the <ENTER> button.
3333Press ▲▼ to select one from Image 1 to 10 and press the <ENTER> button.
zzA confirmation box appears and then select [Yes].
Note
zzTo store the adjusted data except [Daylight View].
zzMake sure you selected [Store] after adjusting settings. Some settings can not be stored if not registered with [Store] function.
Settings
ENGLISH - 57