Input menu

Select [Input] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu.

Remote Control

Side Control

Input 1

1111Press ▲▼ to select [Input 1].

2222Press ► to access the submenu.

3333Press ▲▼ to select [RGB(PC analog)], [RGB(Scart)], [DVI-D], [DVI-D(HDCP)] or [HDMI].

4444Press the <ENTER> button.

JJComputer System Selection

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 109 -113.)

 

When the projector cannot recognize the

Auto

 

connected signal conforming to the

 

 

provided PC Systems, Auto is displayed

 

on the System Menu box and the Auto PC

 

adjustment function works to display proper

 

images. If the image is not projected

 

properly, a manual adjustment is required.

 

There is no signal input from the computer.

- - - -

 

Check the connection between your

 

 

computer and the projector.

 

The preset system is manually adjusted in

Mode 1

 

the PC adjust Menu. The adjusted data can

 

 

be stored in Mode 1-10.

SVGA 1 PC Systems provided in this projector

is chosen. The projector chooses a proper system provided in the projector and displays it.

* Mode 1 and SVGA 1 are examples.

1111Press ▲▼ to select [System].

2222Press ► or the <ENTER> button to access the submenu.

3333 Press ▲▼ to select the desired system.

Input 2

1111Press ▲▼ to select [Input 2].

2222Press ► to access the submenu.

3333Press ▲▼ to select [Video], [Y, Pb/ Cb,Pr/Cr], or [RGB].

4444Press the <ENTER> button.

Input 3

1111Press ▲▼ to select [Input 3].

2222Press ► to access the submenu.

3333Press ▲▼ to select [Video], [Y, Pb/ Cb,Pr/Cr], or [S-video].

4444Press the <ENTER> button.

JJVideo System Selection

Video or S-video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is [PAL-M] or [PAL-N], select the system manually.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among [PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and [PAL-N].

Settings

ENGLISH - 49