Display

This function decides whether to display On-Screen Displays.

1111Press ▲▼ to select [Display].

2222Press the <ENTER> button.

3333Press ▲▼ to switch between each option as below.

On Show all the On-Screen displays *1

Countdown Show the input image instead

off of the countdown when turning on the projector *2

Off Hide the On-Screen Displays *3

*****Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option.

*****Use this function when you want to project the image as early as possible even when the lamp is not bright enough.

*****Hide the On-Screen Displays except;

●On-Screen Menu.

●[Power off?]

●[P-timer] display.

●No signal for [Power management]

●[Please wait ...]

●[Picture in Picture]

●[Simple mode]

●[Video delay control]

●Arrows for the [True] function in the Screen

Menu.

●[Service]

Background

Select the background screen for when no input signal is detected.

1111Press ▲▼ to select [Background].

2222Press the <ENTER> button.

3333Press ▲▼ to switch between each option as below.

Blue Blue colored background.

User The logo transferred by "Logo Transfer Software *1 " is projected.

Black Black colored background.

*****"Logo Transfer Software" is included on the supplied CD-ROM.

Setting

Logo

This function allows you to customize the screen logo with [Logo select], [Logo PIN code lock] and [Logo PIN code change] functions.

1111Press ▲▼ to select [Logo].

2222Press ► or the <ENTER> button.

3333Press ▲▼ to choose the desired item.

JJLogo select

This function decides on the starting-up display from among following options.

Off Show the countdown display only.

Default Show the factory-set logo.

User The logo transferred by "Logo Transfer Software *1 " is projected.

*****"Logo Transfer Software" is included on the supplied CD-ROM.

JJLogo PIN code lock

This function prevents an unauthorized person from changing the screen logo.

Off The screen logo can be changed freely from the Logo Menu.

On The screen logo cannot be changed without a Logo PIN code.

Note

zzIf you want to change the Logo PIN code lock setting,

press the <ENTER> button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.

JJLogo PIN code change

Logo PIN code can be changed to your desired four- digit number.

1111Press ▲▼ to select [Logo PIN code

change] and press the <ENTER> button.

zzCurrent logo PIN code dialog box appears.

2222Press ▲▼ to enter the current code, press the ► button to fix the number and move the red frame pointer to the next box.

zzThe New Logo PIN code input dialog box appears.

3333Repeat this step to set the new Logo PIN code.

Settings

ENGLISH - 63