Precautions for Use
JJCautions when setting the projectors
zzWhen installing and using the projector with a method other than the floor standing installation using the adjustable feet, fix the projector using the five screw holes for ceiling mounting (shown in the figure). (Screw diameter:M6, tapping depth inside the set:12mm, torque: 4 ± 0.5 N•m)
Screw holes for ceiling mount (M6)
zzDo not stack the projectors.
zzDo not block the ventilation ports (intake and exhaust) of the projector. zzAvoid heating and cooling air from the air conditioning system directly
blow to the ventilation ports (intake and exhaust) of the projector.
| over 50 cm | over 1 m (40") |
over 1 m (40") | (20") |
over 50 cm (20")
Important Information
zzDo not place the projector in an confined space.
When it is necessary to install in a confined space, install the air conditioning or ventilating installation separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
zzDo not use the projector tilted at an angle that exceeds ± 10 degrees vertically.
+10° 
zzIn upward and downward projection, do not tilt the projector over 10 degrees right and left.
° 
°
10° 10°
ENGLISH - 13