Panasonic Setting up

Started Getting

Setting up

Projection method

You can use the projector with any of the following 4 projection methods. To set the desired method in the projector.

JJSetting on a desk/floor and	JJMounting on the ceiling and
projecting forward	projecting forward

Menu setting*1		Menu setting*1
Ceiling	Off		Ceiling	On
Rear	Off		Rear	Off

JJMounting on the ceiling and	JJSetting on a desk/floor and
projecting from rear	projecting from rear
(Using translucent screen)	(Using translucent screen)

Menu setting*1		Menu setting*1
Ceiling	On		Ceiling	Off
Rear	On		Rear	On

***** For details about the menu setting, please refer to the [Screen] menu [Ceiling] and [Rear]. (Æ page 60)

Attention

zzFor optimum viewing quality, install the projector in a location where screen exposure to outside light, light from light fixtures or other light is at a minimum. Also draw the curtains, close blinds and turn off light fixtures.

Parts for ceiling mount (Optional)

You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKE200H: for high

ceiling, ET-PKE200S: for low ceiling), and the optional projector mount base ET-PKE200B. zzUse only the ceiling mount brackets specified for this projector.

zzRefer to the installation manual for the ceiling mount bracket when you install the bracket and the projector.

Attention

zzTo ensure projector performance and security, installation of the ceiling mount bracket must be carried by your dealer or a qualified technician.

24 - ENGLISH