Information

Select [Information] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu.

Remote Control

Side Control

Input Source Information Display

The Information Menu is used for checking the status of the image signal being projected and the operation

of the projector.

You can also press the <INFO> button on the remote control to display the Information menu.

JJInput

The selected input source is displayed.

JJSystem

The selected system is displayed.

JJH-sync freq.

The selected H-sync freq. is displayed.

The horizontal frequency of the input signal is displayed in kHz, or - - - kHz when no signal.

JJV-sync freq.

The selected V-sync freq. is displayed.

The vertical frequency of the input signal is displayed in Hz, or - - - Hz when no signal. Numbers of Hz doubles when during Interlace.

JJScreen

The selected Screen size is displayed.

JJLanguage

The selected language is displayed.

JJLamp power

The selected lamp mode is displayed.

JJLamp runtime

The cumulative lamp operating time is displayed.

JJFilter counter

The filter using time filter is displayed.

JJPower management

[Off] , [Ready] or [Shut down], and [Timer] are displayed.

JJKey lock

The selected Key lock icon is displayed.

JJPIN code lock

[Off], [On 1] or [On 2] is displayed.

JJShutter management*

To display the setting of [Protection] and time.

*(Only for EZ570 series, EW630 series and EX600 series.)

JJSimple mode

To display the configuration of a simple remote control mode.

JJRemote control

The selected remote control code is displayed.

JJSerial number

The serial number of the projector is displayed. The serial number is used to service the projector.

Settings

ENGLISH - 71