Settings
Setting
Filter counter
This function is used to set the frequency of cleaning or replacing the filter unit.
1111Press ▲▼ to select [Filter counter].
2222Press ► or the <ENTER> button to access the submenu items.
JJFilter counter
Show the total accumulated time of the filter use timer setting.
JJFilter counter remaining
The remaining time for the filter counter is displayed in units of 10%.
zzThis is displayed in red when the remaining time is 10%.
JJFilter counter timer
To set a timer. When the projector reaches the selected time the filter warning icon appears on the screen.
1111Press ▲▼ to select [Filter counter timer] and then press the <ENTER> button.
2222Press ▲▼ to set the timer.
zzSelect from [Off/1000 H/2000 H/3000 H/ 4000 H/6000 H/8000 H/9000 H/12000 H] depending on the use environment.
zzThe situation which different icons appear as below shown:
When the remaining time is less than 10%.
When the remaining time is 0, the filter replacement is necessary.
When the projector reaches a time set by user in the timer setting.
Attention
zz[Filter counter remaining] disappears, 
will be
displayed. | appeared about 10 hours later, and | |
powered on the projector about 3 minutes later, the | ||
projector will power off automatically and enter the | ||
standby mode in order to protect the inner parts of the | ||
projector. When | is displayed, please clean or replace | |
the air filter units as soon as possible and then reset the [Filter counter].
JJFilter counter reset
After cleaning or replacing the filter unit, be sure to reset the timer.
1111 Press ▲▼ to select [Filter counter reset].
2222 Press the <ENTER> button.
zz[Filter counter Reset?] appears. Select [Yes] to continue. Another confirmation dialog box appears, select [Yes] to reset the [Filter counter].
Test pattern
Results of adjustment of the position , size and other factors are not reflected in test patterns. Ensure the input signal is displayed before performing various kinds of setting.
1111 Press ▲▼ to select [Test pattern].
2222 Press ► or the <ENTER> button to access the submenu items.
3333 Press ▲▼ to go backwards and forwards between test patterns as below.
zz[Color], [Gradation 1], [Gradation 2], [Gradation 3], [Gradation 4], [All white], [All black] and [Cross].
Note
zzEven while the test pattern is displayed, the zoom, focus, lens shift, shutter, and power off functions take priority.
Factory default
This function returns all setting values except for [PIN code lock], [Logo PIN code lock] and [Filter counter] to the factory default settings.
1111 Press ▲▼ to select [Factory default].
2222 Press the <ENTER> button.
zz[Return to Factory default?] appears. Select [Yes] to continue. Another confirmation dialog box appears, select [Yes] to return to [Factory default].
70 - ENGLISH