Network
Select [Network] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the
Remote Control | Side Control |
Projector name
You can change the projector name to be displayed on the network.
1111Press ▲▼ to select [Projector name].
2222Press the <ENTER> button.
3333Press ▲▼◄► buttons to set the [Projector name].
Default gateway | Enter the gateway address if DHCP | |
(Display of gateway | ||
server is not used. | ||
address and setting) | ||
| ||
DNS1 |
| |
(Display of Preferred | Enter the DNS server address if | |
DNS server address | DHCP server is not used. | |
and setting) |
| |
DNS2 |
| |
(Display of Alternate | Enter the alternate DNS server | |
DNS server address | address if DHCP server is not used. | |
and setting) |
|
3333Press ▲▼◄► to select [Set], and press <ENTER> button.
zzDefault wired LAN settings
The following settings are set before the projector leaves the factory.
DHCP | Off |
IP address | 192.168.10.100 |
Subnet mask | 255.255.255.0 |
Default gateway | 192.168.10.1 |
DNS 1/DNS 2 | NONE |
Note
zzBefore using the DHCP server, make sure the DHCP server is already functioning.
zzFor details of IP address, subnet mask, gateway and DNS, ask the network administrator.
Settings
Network setup
You can make detailed wired LAN settings.
1111Press ▲▼ to select [Network setup], and press <ENTER> button.
2222Press ▲▼ to select an item, and change the setting according to the instructions.
| On: If a DHCP server exists in the |
| network to which the projector |
| is connected, the IP address |
DHCP | will automatically be acquired. |
Off: If a DHCP server does not | |
(DHCP client function) | exist in the network to which |
| the projector is connected, |
| additionally set [IP address, |
| [Subnet mask] and [ Default |
| gateway]. |
|
|
IP address | Enter the IP address if DHCP |
(Display of IP address | |
and setting) | server is not used. |
Subnet mask | If not using a DHCP server, |
(Displaying and | |
setting the subnet | enter the subnet mask |
mask) |
|
Network control
Set when you want to control the projector from a computer connected to the network.
1111Press ▲▼ to select [Network control].
2222Press ► or the <ENTER> button to access the submenu items.
3333Press ▲▼ to select one item and press ◄► to switch the function between [On] and [Off].
WEB control | Set to [On] to control with the Web | |
browser. | ||
| ||
PJLink control | Set to [On] to control with the | |
| PJLink protocol. | |
Command | Set to [On] to control with the | |
SERIAL IN terminal control | ||
control | ||
command format. | ||
| ||
AMX D. D. | Set to [On] to control with the | |
AMX Device Discovery. | ||
| ||
RoomView | Set to [On] to control with the | |
Crestron RoomView®. | ||
|
72 - ENGLISH