Powering ON/OFF
ON(G)/STANDBY(R) indicator
The <ON(G)/STANDBY(R)> indicator informs you the status of the power. Confirm the status of the <ON(G)/ STANDBY(R)> indicator before operating the projector.
<ON(G)/STANDBY(R)> indicator
ヰワ ヨ バ | ヵユヮヱ |
チヴヵモワュャヺ | ン |
ョリロヵユン ヴラヶヵヵユン ロモヮヱ
Operation Basic
Indicator status | Status | ||
No illumination or flashing | The power cord is unplugged. | ||
RED | Lit | The power cord is plugged. | |
The projector is in | |||
|
| ||
|
| The projector is cooling down. The projector cannot be turned on until cooling is | |
|
| completed and the <ON(G)/STANDBY(R)> indicator stops blinking. | |
ORANGE | Flashing | The temperature inside the projector is abnormally high and the projector is cooling | |
down. And the <TEMP> indicator also blinks in red (Æpage 91). The projector | |||
|
| ||
|
| cannot be turned on until cooling is completed and the <ON(G)/STANDBY(R)> | |
|
| indicator stops blinking. | |
| Lit | Projecting. | |
GREEN |
| The projector is in | |
Flashing | The projection lamp will be turned on if the input signal is reconnected or any | ||
| |||
|
| button on the control panel or remote control is pressed. (Æpage 67) | |
36 - ENGLISH