Removing and attaching the projection lens
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications.
JJRemoving the lens
1.Press and hold the <LENS> button or <LENS SHIFT> button for more than 5 seconds to make the lens return to the central position.
2.Turn off the projector and unplug the AC power cord.
3.While pressing the lens release button, rotate the projection lens counterclockwise, and remove the projection lens.
Lens release button
Attention
zzBe careful when handling the lens. Do not drop.
JJAttaching the lens to the projector
1.Remove the lens mount cover.
2.Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector.
3.Slowly turn the lens clockwise until it clicks. Make sure that the lens is fully inserted to the projector.
Red dots
Attention
zzDo not press the lens release button when attaching the lens.
Setting up
Getting Started
ENGLISH - 25