Powering ON/OFF
Turning On the Projector
(3)
(3)
(2)
1111 Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector.
2222 Connect the projector’s AC power cord into an AC outlet. The <ON(G)/STANDBY(R)> indicator lights red.
3333 Press the < |
| > button on the side control or |
the <POWER ON> button on the remote control. | ||
The <ON(G)/STANDBY(R)> indicator lights | ||
green and the cooling fans start to operate. The | ||
preparation display appears on the screen and | ||
the count down starts. | ||
4444 After the countdown, the input source that was selected the last time and the lamp power status
icon appear on the screen.
If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page.
Note
Preparation display
06
The preparation display will disappear after 30 seconds.
Initial display
Input source 
Lamp power status
Basic Operation
zzWhen the [Logo select] function is set to [Off], the logo will not be shown on the screen (Æpage 63).
zzWhen [Countdown off] or [Off] is selected in the [Display] function, the preparation display will not be shown on the screen (Æpage 63).
zzWhen the [Direct on] function is set to [On], the projector will be turned on automatically by connecting the AC power cord to an AC outlet.
zzThe Lamp replacement icon and the Filter replacement icon may appear on the screen depending on the usage state of the projector.
zzWhen the [Picture in Picture] function is set to User
ENGLISH - 37