About indicator status

JJWhen there is a problem with internal power

The status of the indicator is displayed with the following symbols. : Off, : On, : Flashing, : Off or On or Flashing

 

 

Indicators

 

 

 

 

 

<ON(G)/

<TEMP>

 

<SHUTTER/

<LAMP>

Status of the projector

STANDBY(R)>

<FILTER>

Green/Red/

Red

Orange

AV MUTE>

Orange

 

 

 

Blue

 

 

 

Orange

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A problem has been detected within the

 

 

 

 

 

projector.

 

 

 

 

 

 

The projector will not turn back on even when

 

 

 

 

 

pressing the <POWER ON> button on the

 

 

 

 

 

remote control or the <

 

> button on the side

//*1

 

 

 

 

control. Remove the power plug from the outlet,

*1

*1

*1

*1

and plug it back in again.

 

 

 

 

 

 

If the power turns off, or the indicator turns on

 

 

 

 

 

or flashes again, remove the power plug from

 

 

 

 

 

the outlet and contact your dealer to request an

 

 

 

 

 

inspection and repair. Do not leave the projector

 

 

 

 

 

plugged in with the indicator on or flashing.

 

 

 

 

 

Doing so may cause a fire or electric shock.

 

 

 

 

 

 

 

 

*1: The indicator will flash in approximately 0.5-second intervals.

JJWhen there is a problem with the air filter

The status of the indicator is displayed with the following symbols. : Off, : On, : Flashing, : Off or On or Flashing

 

 

Indicators

 

 

 

 

 

<ON(G)/

<TEMP>

 

<SHUTTER/

<LAMP>

Status of the projector

 

 

STANDBY(R)>

<FILTER>

 

 

Green/Red/

Red

Orange

AV MUTE>

Orange

 

 

 

Blue

 

 

 

Orange

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The indicator notifies you when the time set

 

 

 

 

 

 

 

with [Filter counter timer] has been reached.

 

 

 

 

 

 

 

Replace the air filter. (Filter replacement icon

 

 

/*1/*1

*1

*1

*1

will be shown at the top right of the screen

 

 

simultaneously.*2)

 

 

//

*2

*2

*2

*2

Alternatively, the indicator notifies you when

 

Maintenance

projector is forced shutdown. Install the air

 

 

 

 

 

 

[Filter counter remaining] becomes 0%.

 

 

 

 

 

 

 

Replace the air filter.

 

 

 

 

 

 

 

When the air filter unit isn't installed, the

 

 

 

 

 

 

 

filter unit.

 

 

 

 

 

 

 

 

 

 

*1: The indicator will change according to different conditions, regardless of the status of other indicators.

*2: The indicator will flash in approximately 0.5-second intervals.

*3: When [Display] (Æ page 63) is set to [Off], the freeze function (Æ page 43) or shutter function (Æ page 41) will not be displayed on the screen during operation.

ENGLISH - 91