If an indicator turns on
If a problem occurs within the projector, it will be notified with the temperature indicator <TEMP>, the filter indicator <FILTER>, the shutter indicator <SHUTTER*/AV MUTE*>, and the lamp indicator <LAMP>. Check the status of the indicators and take the following action.
*<SHUTTER> indicator (Only for EZ570 series, EW630 series and EX600 series.) <AV MUTE> indicator (Only for EW530 series and EX500 series.)
CAUTION
zzBefore you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. (Æpage 39)
zzIf multiple indicators light or blink, verify the status of the projector by looking at each indicator.
Note
zzConfirm the status of the power indicated on the <ON(G)/STANDBY(R)> indicator.
JJWhen operating correctly
The status of the indicator is displayed with the following symbols. : Off, : On, : Flashing, : Off or On or Flashing
| Indicators |
|
|
|
|
|
|
|
| |
<ON(G)/ | <TEMP> |
| <SHUTTER/ | <LAMP> | Status of the projector |
|
| |||
STANDBY(R)> | <FILTER> |
|
| |||||||
Green/Red/ | Red | Orange | AV MUTE> | Orange |
|
|
|
|
|
|
Blue |
|
|
|
|
|
| ||||
Orange |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
// | | | | | The power plug has been removed from the | |||||
outlet. |
|
| ||||||||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The projector is in the standby mode. |
|
| |||
// | *1 | *1 | *1 | *1 | Turns on when pressing the <POWER ON> | |||||
button on the remote control or the < |
|
|
| > | ||||||
|
|
|
|
| button on the side control. |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
// | *1 | *1 | *1 | *1 | The projector is operating normally. |
|
| |||
|
|
|
|
| The lamp is cooling down. The projector does | |||||
//*2 | *1 | *1 | *1 | *1 | not turn on when pressing the <POWER ON> | |||||
button on the remote control or the < |
|
| > button | |||||||
|
|
|
|
| on the side control until the standby indicator | |||||
|
|
|
|
| <ON(G)/STANDBY(R)> changes to red. |
|
| |||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| The projector is in the power management | |||||
*2// | *1 | *1 | *1 | *1 | mode. The lamp will turn on when controlling the | |||||
|
|
|
|
| projector, allowing the user to start operating it. | |||||
|
|
|
|
|
|
|
|
|
| |
//*2 | *1 | *1 | *1 | *1 | Power management mode is [On] and the lamp | |||||
is cooling down. |
|
| ||||||||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| The shutter function has been turned on. | |||||
// | *1 | *1 | | *1 | Press any button on the remote control or the | |||||
|
|
|
|
| side control to cancel the function. |
|
| |||
|
|
|
|
|
|
|
|
|
| |
|
|
| *2 |
| The projector is in the shutter management | |||||
// | *1 | *1 | *1 | mode. The lamp will turn on when controlling the | ||||||
|
|
|
|
| projector, allowing the user to start operating it. | |||||
|
|
|
|
|
|
|
|
|
| |
//*2 | *1 | *1 | *2 | *1 | Shutter management mode is [On] and the lamp | |||||
is cooling down. |
|
| ||||||||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
*1: The indicator will change according to different conditions, regardless of the status of other indicators.
*2: The indicator will flash in approximately
Maintenance
ENGLISH - 89