Settings
Setting
Simple mode
This function decides whether to activate the simple mode.
1111Press ▲▼ to select [Simple mode] and then press the <ENTER> button.
2222Press ▲▼ to switch between [On] and [Off].
On | Only the simple mode buttons | |
are active. | ||
| ||
Off | Simple mode function is off. |
Only these buttons are active when the simple mode is set to [On]. [POWER ON, STANDBY,
SHUTTER (AV MUTE), INPUT, MENU, AUTO PC ADJ, ▲, ▼ (MUTE), ◄
SELECT, IMAGE ADJUST,
P, ON /OFF]. Number buttons
also become active only when setting the remote control codes numbers or entering the PIN code numbers.
Note
zzWarning icon and 
[Simple mode : On] message appear on the screen for about 4 seconds when
press the button which is not the simple mode button.
Remote control
This switching function prevents remote control interference when operating several projectors or video equipment at the same time.
1111Press ▲▼ to select [Remote control].
2222Press the <ENTER> button.
3333Press ▲▼ to select one among the sixty and five codes.
zzThis projector provides 65 different remote control codes: [All], [Code 01]~[Code 64].
Note
zzWhen operating the projector under [All] code, you can operate several projectors at the same time. If you want to operate the projector independently, you must switch to other code.
zzWhen different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector.
RC sensor
Select a location of the infrared remote receiver of the remote control.
1111 Press ▲▼ to select [RC sensor].
2222 Press ► or the <ENTER> button.
3333 Press ▲▼ to select one among options as below.
All | Activate all of the receivers. |
Front & | Activate both the front and top |
Top | receivers. |
Top & | Activate both the top and back |
Back | receivers. |
Front & | Activate both the front and back |
Back | receivers. |
Front | Activate only the front receiver. |
Top | Activate only the top receiver. |
Back | Activate only the back receiver. |
Eco management
Can optimize lamp power and reduce the power consumption according to the application.
1111 Press ▲▼ to select [Eco management].
2222 Press ► or the <ENTER> button.
JJAuto power save
1111 Press ▲▼ to select [Auto power save] and press the <ENTER>button.
2222 Press ▲▼ to choose [On] between [On] and [Off].
3333 Press ▲▼ to select auto power save conditions.
Ambient light | Adjusts the lamp power according |
detection | to the ambient brightness. |
Signal | Drops the lamp power when no |
detection | signal is input. |
AV mute | Drops the lamp power in the AV |
detection*1 | mute mode. |
*****This function is only for EW530 series and EX500 series.
Note
zzWhen [Auto power save] is [Off], [Ambient light detection], [Signal detection] and [AV mute detection] are not available.
66 - ENGLISH