Panasonic UF-4100 manual Substitute Memory Reception, Print Collation Mode

Receiving Documents

Substitute Memory Reception

If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically starts receiving documents into its image data memory. Stored documents are printed automatically after replacing the recording paper or the toner cartridge. (See Note 1 and 2)

1

2

When the machine finishes the memory reception and there is no recording paper or toner, an Information Code appears on the display.

Install the recording paper (see page 17) or replace the toner cartridge (see page 15).

The machine will automatically start printing the document stored in the memory.

NO REC.PAPER 010

OUT OF TONER 041

* PRINTING *

Print Collation Mode

The printing mechanism of the UF-4100 is a Reverse Order Stacking construction. The UF-4100 has a Print Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking. The requirements for the Print Collation Mode to be active are; 1) Fax Parameter No. 65 PRINT COLLATION set to “Valid”, and 2) enough remaining memory.

The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements is not met.

Sending Document Order		Stacking Document Order
	Correct Order Stacking		Reverse Order Stacking
	(Collation Mode)		(Non-Collation Mode)

1		1			3
2			2			2
	3			3			1

NOTE	1 If the memory overflows, the machine will stop receiving and release the communication line.
	The document(s) stored in the memory up to that moment will be printed out.

2If you wish to turn off the substitute reception function, change the setting of Fax Parameter No. 22 to "Invalid". (See page 34)

Basic Operations

65