Log Autolog, Measurements Menu (2)
Log Autolog, Measurements Menu (1)
3 Rx User BER (N)

6.15LOG MENU

Traffic Log: [43]entries 1:View 2:Print 3:Clear 4:Autolog

Log Menu

The Log menu allows the operator to view, print or clear the internal 1000 event traffic log. The Autolog option allows the operator to have certain parameters added to the traffic log at regular intervals. The traffic log is a circular store of 1000 locations, events not viewed or printed are lost after 1000 subsequent events. The options are as follows:

VIEW

This allows the log to be viewed on the LCD. The Up Arrow and Down Arrow keys

 

allow the operator to scroll through the list of logged events. Each entry is logged

 

with it’s time and date.

PRINT

This allows the log entries to be printed to the rear panel serial port (on the Async

 

ESC connector), either just the unprinted entries, or the whole log.

CLEAR

The log is cleared.

AUTOLOG

This is described below.

6.15.1 Log, AUTOLOG Menu

Auto log period: [60 mins] (0=Off) ???? mins (Yes)

Log, Autolog Menu

This first screen sets the period between automatic log entries. Entering a figure of zero disables the automatic logging of any data. When YES is pressed with a non-zero value for the Autolog period, the following screen is accessed:

Autolog(Y/N): 1 Buffer % (Y) 2 Eb/No (Y)

More

This screen allows the operator to toggle each of the first three9loggable events on and off. (N) indicates No, the data will not be logged, (Y) indicates Yes the data will be logged. Pressing the key corresponding to each data type toggles between (Y) and (N). More options are available on subsequent screens:

Autolog (Y/N): 1:BERT BER (N) Back

P300H

P300 Series Modem Installation and Operating889Handbook

Page 120

2:Tx Terr BER (N) 3:Rx Terr BER (N) More

Finally, if AUPC is active (see AUPC in section 8.11.1 on page 154), another subsequent screen is offered:

Autolog (Y/N): 1:AUPC Delta Power (Y)

2:Distant end Eb/No (N) Back

Log Autolog, Measurements Menu (3:AUPC)

Page 120
Image 120
Paradise P300 specifications LOG Menu