Paradise P300 specifications First Direction Avail

Cat' Message

Mnemonic

4RxCalcQry

4RxCalcRd

4TxCalcQry

4TxCalcRd

5GoLocal

5ContModeQry

5ContModeRd

5ContModeWr

6ShortDeviceQry

6	ShortDeviceRd
6	UnitInfoQry

6UnitInfoRd

7SAFChgWr

7SAFStatQry

7SAFStatRd

8ActionWr

9TxPwrQry

9TxPwrRd

9TxPwrWr

10Log16EventQry

10Log16EventRd

First	Direction
Avail'
V1.49*	to unit
V1.49*	from unit
V1.49*	to unit
V1.49*	from unit
V1.37	to unit
V1.37	to Unit
V1.37	from unit
V1.37	to unit
V1.49	to unit
V1.37	from unit
V0.61	to unit
V0.61	from unit
V1.76*	to unit
V1.49*	to unit
V1.49*	from unit
V1.18	to unit
V0.61	to unit
V0.61	from unit
V0.61	to unit
V0.71*	to unit
V0.71*	from unit

Instr' Code

28

29

8

32

33

0

37

51

50

43

26

27

34

Body	Partner
Length	(optional)
0	RxCalcRd	Query
26	RxCalcQry	Config
0	TxCalcRd	Query
30	TxCalcQry	Config
0	(ack)	Command
0	ContModeRd	Query
2	ContModeQry	Config
2	(ack)	Change
0	ShortDeviceRd	Query
6	ShortDeviceQry	Status
0	UnitInfoRd	Query
18	UnitInfoQry	Status
14	(ack)	Change
0	SAFStatRd	Query
58	SAFStatQQry	Config
4	(ack)	Action
0	TxPwrRd	Query
2	TxPwrQry	Config
2	(ack)	Change
1	Log16EventRd	Query log
178	Log16EventQry	Log events

Function

Calculated Rx parameters, eg intermediate data rates (ie with each overhead as added), Min overhead frame lengths, ESC rates available (current config only)

Calculated Tx parameters, eg intermediate data rates (ie with each overhead as added), Min overhead frame lengths, ESC rates available (current config only).

Local / remote config parameters

The device model number & software version (two most significant digits only)

The model number, version numbers & ID's of the internal cards & software

Enter an unpgrade code, there is no direct corresponding read other than SAFStat

Query the hardware & software feature capability

Front panel `actions`, eg buffer centre, clear slip counters, etc.

Short message for Tx power or carrier on/off without rest of Txmod. To allow changes to Tx power without risk of anything else being reconfigured & hence traffic disturbed (current config only).

To read the traffic log.

10	Log4EventQry	V0.71	to unit
10	Log4EventRd	V0.71	from unit
10	LogDoneMsgWr	V0.71	to unit
11	RemoteKbdWr	TBD	to unit
11	RemoteLCDRd	TBD	from unit
11	Reset	V0.61	to unit
11	TimeDateQry	V0.88	to unit
11	TimeDateRd	V0.88	from unit
11	TimeDateWr	V0.88	to unit

35

36

9

4

10

11

1	Log4EventRd	Query log
46	Log4EventQry	Log events
2	(ack)	End log query
6	RemoteLCDRd	Keyboard
110	RemoteKbdWr	Display
0	(ack)	Command
0	6TimeDateRd	Query
6	TimeDateQry	Status
6	(ack)	Change

Remote operation of unit as if from keyboard. Initial RemoteKbdWr message with either all no key presses or single `Main` keypress initiates first RemoteLCDRd.

The time & date of the internal real time clock. The timeDateWr will probably be used in broadcast mode (address 0), and the TimeDateRd probably used on status screens to display the current unit time to compare log entries to etc.

P300H P300 Series Modem Installation and Operating Handbook Page 199