Paradise P300 specifications Build Name Filename

Mnemonic

Function

Message

Cat'

First Direction Avail'

Instr'	Body	Partner
Code	Length	(optional)

Note: Instruction codes used for SA-bus messages are as specified above + 30H. SA-bus instructions 70-7F are not used

* Note on `First Available` column

Items marked have been available since the version specified, but only in specific builds, there are different builds of the code as follows:

11	CommsPing	V1.37	to unit	63	0	(ack)	Query	Used to test comms integrity, and general acknowledge for many commands
11	Ack (original)	V0.61	from unit		0	General Ack to	Acknowledge	which do not directly request a response
11	Ack (extended)	V0.61	from unit		1	many messages
						6

Build Name	Filename	Marked message available ?	Comments
P440 build	P440Vxxx	No	Build applicable only to Q460 board (ID_Dig=0) with Xilinx IFU (ID_IFU=0) and 4M code storage (Boot_Code will be V1.x for 4M)
P460 build	P460Vxxx	No	Build applicable only to Q460 board (ID_Dig=0) with ASIC IFU (ID_IFU=1 or 2) and 4M code storage (Boot_Code will be V1.x for 4M)
P480 build	P480Vxxx	Yes	Build applicable to all Q480 boards (ID_Dig=1, all of which have 8M code storage) with any IFU, OR a Q460 board (ID_Dig=0) modified to have
			8M code storage (Boot_Code will be V2.x for 8M) fitted with any IFU
P300 build	P300vxxx	Yes	Build applicable to all P300's

P300H P300 Series Modem Installation and Operating Handbook Page 200