P300H P300 Series Modem Installation and Operating Handbook Page 198
List of All Remote M&C MessagesCat' Message First Direction Instr' Body Partner Function
Mnemonic Avail' Code Length (optional)
1 RxBBQry V0.61 to unit 16 1 RxBBRd Query Configuration of the Rx Baseband section, ie Insert M ux, Deframer, Clocking,
Buffer, ESC functions, Descramblers, Station clock (current config or config
memories)
1 RxBBRd V0.61 from unit 70 RxBBQry Config
1 RxBBWr V0.61 to unit 17 70 (ack) Change
1 RxModQry V0.61 to unit 20 1 RxModRd Query Configuration of the Rx demodulator functions, ie modulati on, IF frequency, Reed
Solomon parameters, FEC coding & FEC rate, Spectrum inversion, Sweep width
(current config or config memories).
1 RxModRd V0.61 from unit 14 RdModQry Config
1 RxModWr V0.61 to unit 21 14 (ack) Change
1 TxBBQry V0.61 to unit 18 1 TxBBRd Query Configuration of the Tx Baseband section, ie Drop Mux, Framer, Clocking, ESC
functions, Scrambl ers (current config or confi g m emories).
1 TxBBRd V0.61 f rom unit 58 TxBBQry Config
1 TxBBWr V0.61 to unit 19 58 (ack) Change
1 TxModQry V0.61 to unit 22 1 TxModRd Query Configuration of the Tx modulator functions, ie modulation, IF frequency, Reed
Solomon parameters, FEC coding & FEC rate, Spectrum inversion (current config
or config memories).
1 TxModRd V0.61 fr om unit 14 RdModQry Config
1 TxModWr V0.61 to unit 23 14 (ack) Change
1 UnitCfgQry V0.61 to unit 24 1 UnitCfgRd Query The parameters which affect both Tx & Rx paths, including user alarm thresholds,
and all `user settings` etc (current config or config memories).
1 UnitCfgRd V0.61 from unit 26 UnitCfgQry C onfig
1 UnitCfgWr V0.61 to unit 25 26 (ack) Change
1 AUPCQry to unit 44 1 AUPCRd Query Settings related to Auto Uplink Power Control (AUP C), contains parameters for
V2.09*both Tx and Rx paths, including performance figures for the dista nt end of the link.
1 AUPCRd from unit 16 AUPCQry Config
V2.09*
1 AUPCWr to unit 45 16 (ack) Change
V2.09*
2 TestResQry to unit 38 0 TestResRd Query Test results from the internal PRBS tester
V1.37*
2 TestResRd from u nit 12 TestResQry S tatus
V1.37*
2 UnitResQry V0.61 to unit 39 0 UnitResRd Query The results of internal BER mea surments & the source for those when the source
is variable.
2 UnitResRd V0.61 from unit 22 UnitResQry S tatus
2 UnitStatQry V0.61 to unit 42 0 UnitStatRd Query The alarm status of the unit. Separate Unit, Tx traffic, & Rx traffic faults & warnings,
as well as Errors, Warnings or Info relating to the (pending) configuration.
2 UnitStatRd V0.61 from unit 46 UnitStatQry Status
2 QFaultQry V0.61 to unit 1 0 QFaultRd Query Summary status in one bit per subject format
2 QFaultRd V0.61 from unit 4 QFaultQry Status
3 UnitTestQry V0.61 to unit 40 0 UnitTestRd Query The test configuration of the unit, loopbacks , PRBS tester configurati on, test
functions (CW, alt 1,0, RS decoder disable)
3 UnitTestRd V0.61 from unit 3 UnitTestQry Status
3 UnitTestWr V0.61 to unit 41 3 (ack) Change