Paradise P300 Change, Rx, Demod’ Aupc Menu, Change, Rx, ESC/AUX/BA Menu, Change, Rx, RX=TX Menu

1.Use Custom Sweep to narrow the sweep range to avoid the false lock, but be careful not to narrow it too much so it avoids the true carrier lock as well. DO NOT increase the sweep range, as this will guarantee to bring false locks within the Demod sweep.

2.Preferably, adjust the Rx IF Frequency to account for the true Rx carrier frequency (including offsets), then adjust the sweep range to 50% of the `Normal` value. This will allow the Demod to re-acquire the carrier (even with further minor variations in Rx carrier frequency) without it sweeping into a false lock. If you are attempting to do this, when you have the Demod correctly locked you can read the current value of offset frequency from the `Demodulator Detailed Status` screen in order to adjust the Rx IF frequency.

6.7.15Change, Rx, Demod’ AUPC Menu

This screen provides the option to enable or disable the “Remote Reporting” facility used with AUPC to enable a distant end modem to report it's Eb/No and BER back to the other end of the satellite link. The facility can be either On or Off. See AUPC in section 8.11.1 on page 154.

6.7.16Change, Rx, ESC/AUX/BA Menu

See Change, Tx/Rx, Modulator, ESC/Aux/BA Menu on page 76

6.7.17Change, Rx, RX=TX Menu

This is described in detail under the initial note on the Rx=Tx function in para 6.7 on page 86

	Set Rx=Tx, so most Rx parameters track Tx: [?]
	1=Off 2=On
	Change, Rx, Rx=Tx Menu
OFF	The receive path operates fully independently from the Tx path
ON	Many of the Rx parameters follow the Tx, which greatly simplifies the configuration
	for duplex links. When enabled only the Insert Mux timeslot selection, Rx Clocking
	& Buffer Size, and IF Frequency & Sweep control require setting independently
	of the Tx path.

Note: Temporarily setting Rx=Tx is a convenient way of copying the Tx configuration to the Rx as when disabled again the Rx path keeps the Tx values, and does not return to the old Rx values.

P300H P300 Series Modem Installation and Operating Handbook Page 95