Paradise P300 Change, Rx, DEMOD’ Menu, Rx=Tx Active, Change, Rx, Demod’, if Frequency Menu

6.7.7Change, Rx, DEMOD’ Menu

The options available on this menu change if the Rx=Tx function (on the Change, Rx Menu) is active.

Tx=Rx Not active

Demod: 1:Freq 2:Mod’n 3:FEC

4:RS 5:Scr 6:Spect Inv 7:Sweep 8:AUPC

Change, Rx, Demod Menu (Rx=Tx not active)

Rx=Tx Active

If the Rx=Tx function is active, only those parameters which vary between Rx & Tx are displayed, the screen appears as follows:

Demod: 1:Freq 2:Sweep 3:AUPC

(most of Rx follows Tx as Rx=Tx active)

Change, Rx, Demod Menu (Rx=Tx Active)

Each of this is now discussed in turn, referring back to the Tx path screens where operation is identical.

6.7.8Change, Rx, Demod’, IF FREQUENCY Menu

See Change, Tx/Rx, Modulator, IF Frequency Menu on page 65

6.7.9Change, Rx, Demod’, MODULATION Menu

See Change, Tx/Rx, Modulator, Modulation Menu on page 65

6.7.10Change, Rx, Demod’ FEC Menu

See Change, Tx/Rx, Modulator, FEC Menu on page 66

6.7.11Change, Rx, Demod’ REED-SOLOMON Menu

See Change, Tx/Rx, Modulator, RS Menu on page 68

6.7.12Change, Rx, Demod’ SCRAMBLER Menu

See Change, Tx/Rx, Modulator, Scrambler Menu on page 69

6.7.13Change, Rx, Demod’ SPECTRUM INVERT Menu

See Change, Tx/Rx, Modulator, Spectrum Invert Menu on page 72

P300H P300 Series Modem Installation and Operating Handbook Page 93