Paxar 938 16

12. Slide the verifier onto the shaft until it stops.

Knife Setup

Non-Knife Setup

13. Tighten the knob.

2-6Operating Instructions

Contents

Page Trademarks FCC Notice Caution Statement of FCC Compliance: Canada CE: Use with NRTL-ListedEquipment Cautions: ♦Laser light - Do not stare into the beam Caution: Do not Page USING THE VCT CONFIGURING THE PRINTER TROUBLESHOOTING SPECIFICATIONS A-1 Chapter Contents Getting Started Note: Do not setup.exe .exe Page Page Page Note: Do not fully tighten these screws Note: Securely tighten the set screws with a 3/32 Hex key Page Page Page Connecting the Cables Installing the Printer Make sure the cables underneath the printer are flat and not in the way Securely tighten ALL the set screws Escape/Clear Page Parallel Bar Code Direction Parallel Bar Code Positioning Specifications No-ScanZone Page Note: Report an Analysis Page Page File Use Wizard… ext New… 1.Click the Additional Values tab ~OS0 Add to List Save or Save As Save as MPCL Store Configuration in Printer Send Configuration to Verifier (via Printer) Send Configuration to Verifier (via Direct Connection) Syntax {V,format#,action,device,”name”¦ D,”vfr_comds”¦} Example {V,1,A,T,”BEAMON”¦ D,”~LV02”¦} Syntax V,vfrID¦ Example {F,25,A,R,M,508,508,"Fmt 25"¦ V,3¦ {V,1,A,T,”BEAMON”¦ D,”~LV02”¦} {F,1,A,R,E,200,200,”Fmt1”¦ {F,9,A,R,E,200,200,"Fmt9"¦ V,3¦ R,62¦ do not Page Option Choices Default Verifier Enter/Pause Do not Yes 2.Press Enter/Pause Page Page Do not use the overstrike action with Error Action Standard RFID with Peel Page Supply select Setup, Flash Memory, and Page Power/Sync LED Calibration Read LED Indicator LED Page Supported Bar Codes: