Store Configuration in Printer

To store the configuration in the printer’s flash memory, make sure the serial cable from your computer is connected to the printer’s 25-pin serial port. A

9-to-25-pin adapter may be used on the communication cable supplied with the verifier.

Saving a configuration in the printer’s flash memory allows you to reference a particular verifier configuration by number (in the verifier field of a format) or allows you to pick the configuration (by name) from the offline menu.

Before you save the configuration to the printer’s flash memory, you must format flash memory.

From the Main Menu, select Setup, Flash Memory, and Format Flash. Formatting flash memory is only required once during initial printer setup.

1.Select File, Store Configuration in Printer… or click the button for this option on the toolbar.

2.Enter a configuration number. You can attach this configuration to a particular format by using this number in the verifier field in your format.

3.Enter a configuration name, up to eight characters. The name you enter here appears in the offline

menu for the mode selection. See “Setting the Mode” in Chapter 5 for

more information.

4.Click OK.

5.Change communication settings if necessary.

The printer’s default settings are 9600, N, 8, 1, DTR. Click OK when finished.

Use this 25-pin serial port for computer to printer connections

4-6Operating Instructions