V e r i f i e r L E D I n d i c a t o r s
Five LED indicators are included on the verifier’s back panel.
| Power/Sync | This LED is green whenever power is applied to the |
| LED | verifier. Upon receipt of any sync input (hardware or |
| serial communications) the LED blinks yellow for |
| approximately 100 milliseconds. |
| Calibration | This yellow LED indicates calibration status. Refer to |
LED | the SV Series Operator’s Guide for more information. |
| Read LED | This LED is green whenever a bar code is being |
| decoded. |
| Indicator LED | These two green LED’s are user programmable exactly |
| 1 and 2 | like the five output ports. Their functions are intended |
| for use as indicators for specific analysis results. |
| A common example is LED 1 programmed to light in |
| latch mode whenever a symbol quality error is detected, |
| while LED 2 is programmed to light in latch mode |
| whenever a No Read error is detected. Refer to the SV |
| Series Operator’s Guide for more information. |
Troubleshooting